FPV FlightClub

How to setup a QAV250 In part 1 of this three part post I talked about how important it is to carefully choose your components when building a QAV250. In part 2 we installed the ESCs, OSDoge and motors. Part...

Here’s the best way I found to remove header pins from a Naze32 or any other header pins off a circuit board. I’ve destroyed 2 Naze32 boards and a D4R-ii until I figure this out. If you try to remove...

I learned this the hard way. If your quadcopter flips or pirouettes on take off, there could be three reasons for this: The motors are spinning the wrong way. Use the motors tab in Baseflight or Cleanflight to check the...