Simple yet useful. This custom designed 3D part replaces the nut and bolt mounting method included in the QAV250 kit. This mount uses low tension zip ties that will pop off upon impact so it won’t split the FPV camera circuit board and trash the camera.
Easily adjustable from 10 – 20 degrees simply by tightening or loosening the zip ties. For 20 degrees tighten the bottom zip ties, for 15 tighten the zip ties equally, for 10 degrees tighten the top zip ties.
- Adjustable from 10-20 degrees
- Includes 3D printed FPV camera mount and 4 low tension zip ties.
- 20 x 40 x 35mm