Home » Products » Electronics » Flight Controllers » Heli Nation Talon F7 Fusion Flight Controller

Heli Nation Talon F7 Fusion Flight Controller

$34.99

In stock

 

 

In stock

SKU: FC7-TALONF7FUSION Categories: , Tags: , , ,

Description

Heli Nation Talon F7 Fusion Flight Controller

A new generation of Talon is here.  The Talon F7 Fusion is an F7 flight controller with dual 90 degree phase gyros.  Built in Betaflight OSD, 6 UARTS, and dedicated LDOs for cleaner gyro and OSD signals makes Talon F7 the most powerful 20X20 FC on the market. One of the features Talon F4 users praised is the choice of using the 8 pin harness or direct soldering motor ports to the ESC. We’ve kept that option, while still adding more features, by letting you remove the plastic connector to reveal motor ports.  Now includes 3 harness cables for direct pin to Aikon AK32PIN, Spedix GS25A, and Airbot Ori32.

Main Features
  1. MCU: STM32F722RET6 216MHz
  2. 2x ICM20602 GYROS 90 deg phase
  3. Built in Betaflight OSD
  4. Up to 8S (36V) direct battery power
  5. Buzzer pads for external buzzer
  6. Built in voltage monitoring resistor
  7. 5V 2A BEC
  8. Dedicated LDO for Gyro, noise free gyro power
  9. Dedicated LDO for OSD, cleaner OSD signal
  10. Led strip shares 5V with 5V/2A BEC
  11. 6 UARTS: UART1, UART2, UART3, UART4, UART5, UART6
  12. Built in camera control pin with resistor and capacitor
  13. 5 Full UARTS with RX AND TX pins
  14. Logical pin layout for cleanest build possible
  15. 8 pin 4 IN 1 ESC plug
  16. Remapable LED pad for additional motor output
  17. TX3, RX3 can be used for I2C for external compass
  18. 5V, VBAT selectable VTX and CAM power
  19. 16M Blackbox flash chip
  20. No flicker VTX pit mode switch (positive switch)
  21. M4 Can be selected either led_strip signal or M4 signal for RPM filtering
Includes
  • Talon F7 Fusion Flight Controller
  • 8 pin harness for Aikon Ak32 ESC
  • 8 pin harness for Spedix GS25A
  • 8 pin harness for Airbot Ori32
  • Xt30 connector
  • 6 Rubber Gummy mounts
  • 6 M2 to M3 adapters

heli nation talon f7 fusion 20x20 flight controller

heli nation talon f7 fusion 20x20 flight controller heli nation talon f7 fusion 20x20 flight controller

Additional information

Weight 5 g
Dimensions 25 x 25 x 5 mm
%d bloggers like this: