Home » Products » 20x20 » FlightClub Neutron Custom Drone Frame

FlightClub Neutron Custom Drone Frame


SKU: Neutron Categories: , , , Tags: , ,


FlightClub Neutron Custom Drone Frame
flightclub neutron fpv race frame

The FlightClub Neutron custom drone frame has all the great features from the PROton, just shrunk down to use the smaller 20x20mm components.

Featuring a mini Nucleus plate that is CNC’d from a solid piece of aluminum.  It has butter mounts and threaded holes for the arm screws.  Butter mount is a flight controller mounting method invented by us that isolates the flight controller from any vibrations using custom silicone grommets.  This greatly reduces noise in the gyro ensuring an ultra smooth flight.  The mini Nucleus plate also has threaded holes for the arm screws that eliminates the need to fumble around with nuts to mount the arms.  Simply screw the arm screws right into the aluminum plate.

The FlightClub Neutron with the Nucleus plate is designed for maximum flexibility.  It has the ability to be built as skeleton mode (standoffs with a carbon fiber top plate) or hybrid pod.

They hybrid pod is designed by MaydayFPVPhoenix3D will have the pod available in different colors and in Nylon.

A custom drone frame should be adaptable for any flying situation or race.  The Neutron is available in 5 different arm option.

Arm Options
  • 5″ Race 22xx motor pattern
  • 5″ Practice 22xx motor pattern (practice arms are slightly wider than the Race arms)
  • 5″ SX
  • 4″ 14xx motor pattern
  • 3″ 14xx motor pattern
flightclub neutron fpv race frameNeutron Highlights
  • 5″ arm configuration is 205mm
  • Mini Nucleus Plate CNC’d out of 7075 Aluminum
  • Can do skeleton or hybrid pod
  • Threaded holes in the Nucleus plate for easy arm replacements.  No nuts or pliers needed.
  • Designed for 20x20mm components.  (max length of board is about 36mm.  No it will not fit the RF Spark32)
  • Butter Mounts for a vibration free flight controller stack.  The Butter Mounts have a M3 center hole but M2 screws will work also.
  • Chamfered edges on the bottom carbon fiber plate
  • Countersunk holes on the bottom plate for a completely flat bottom
  • Camera protection on both skeleton and hybrid mode
  • Camera angle approximately: Hybrid pod 30-80, Skeleton 0-80 degrees
  • 65g Skeleton (5″ arms), 70g Hybrid Pod Canopy
Recommended Build

This build is approximately 230g with 2205 motors without props or battery

See a list of 20x20mm parts for the Neutron.

A GoPro mount for the session is available.  PROton arm guards will fit on the Neutron.


Base Neutron will include the following

Skeleton Mode will include the Base Neutron above plus:

  • 1 – 2mm CF top plate
  • 4 – 25mm Black Standoffs
  • 2 – TPU Camera mount adapters for Micro Camera
  • 8 – M3x8mm button head hex screws

Hybrid Pod Mode will include the Base Neutron above plus:

  • TPU Printed Hybrid Pod
  • 2 – M3x10mm standoffs
  • 2 – M3x25mm standoffs
  • 8 – M3x8mm button head hex screws

Different height Standoffs can be used for higher or lower stacks.

A 20x20mm VTX carbon fiber plate is available separately.

*Images are of the prototypes.  Final production versions may be slightly different.  Don’t worry, they will be changes for the better.

Additional information

Weight 78.0000 g
Dimensions 175.0000 x 118.0000 x 19.0000 mm
Neutron Size

5" Race, 5" Practice, 5" SX, Hybrid 5SX/6, 4", 3"

Neutron Style

Skeleton, Hybrid Pod, Hybrid Pod with Fin

Nucleus Plate Color

Black, Red, Purple

Neutron Pod Color

No Color (Skeleton), Black, Red, Orange, Purple, Blue, Green, White, Grey

You may also like…

%d bloggers like this: