Home » Products » Electronics » Flight Controllers » BrainFPV RADIX LI Flight Controller

BrainFPV RADIX LI Flight Controller

$49.99 $40.00

In stock

 

 

In stock

SKU: FC8-RADIXLI Categories: , , Tags: , ,

Description

BrainFPV RADIX LI Flight Controller

The BrainFPV RADIX LI 20mm x 20mm flight controller 🙂

  • Processor: STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.
  • IMU: Bosch Sensortec BMI160 running at 3.2kHz, connected using SPI.
  • OSD: Full-graphic, PAL/NTSC auto detect, adjustable black and white levels. Full Betaflight OSD support with extra graphical features. Support for side-by-side 3D when used with a 3D FPV camera.
  • Motor Outputs: 6 outputs with full DSHOT (150/300/600/1200) and OneShot support.
  • Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT,  SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup.
  • Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.
  • Serial Ports: 4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry. Inverters are automatically enabled/disabled for maximum flexibility.
  • RGB LEDs: Dedicated RGB LED output.
  • Camera Control: Dedicated output for accessing the camera menu to change camera settings.
  • Buzzer Port: Dedicated port for 5V (100mA max) buzzers.
  • Analog Inputs: Voltage sensing  (VBAT), current input (3.3V max).
  • Power: 3S – 6S (7.5V – 26V), 500mA BEC
  • Dimensions: 26.5mm x 26.5mm, 20mm hole spacing. 4.1mm holes for anti-vibration grommets for M3 screws.
  • Weight: 4g

Includes:

  • RADIX LI flight controller
  • Silicone anti-vibration grommets 4x
  • BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)

Additional information

Weight 5 g
Dimensions 25 x 25 x 5 mm
%d bloggers like this: