DYS XS20A ESC
These XS20A V1 come pre-flashed with the latest A-H-70 BlHeli-S 16.1, Damped Light enabled and are Oneshot ready.
- Silabs EFM8BB2
- high-performance EFM8BB2 50MHz MCU
- BLHeli Bootloader & BLHeli_S Firmware
- Supports 1-2ms signal, Oneshot125, Oneshot42 and Multishot
- 50MHz running speed (BL20A is 16MHz) means better performance on high kv motors. This is like increasing the redline in a car.
- BLHeli Bootloader
- Supports Motors with super high KV
- Version V1. Has solder pads instead of motor wires
- 2-4s (6-16.8v) LiPo
- Output Current 20 amps
- Uses A-H-70 BLHeli firmware
- High-Resolution Throttle steps
- OPTO no BEC
- Signal frequency 20-500Hz
- Output PWM frequency 18kHz
- Size 24 x 14 x 4.5mm
- 4.9 grams without wires
Fresh manufacture date, JULY 2016.