View Post

Design the Best Quadcopter Frame of All Time

In Build, News, Review by FlightClub113 Comments

Best Quadcopter Frame For the past three months I’ve immersed myself in designing the best quadcopter frame and learning how to cut carbon fiber.  It’s been a frustrating, hair pulling experience but I’m very proud with the results. I thought my inner OCD self in making clean builds was bad, designing frames is 100 times worse.  To give you an idea, I …

 
View Post

Drone Backpack – Lowepro QuadGuard BP X2

In Review by FlightClub7 Comments

Lowepro QuadGuard BP X2 – Drone Backpack I love the Lowepro QuadGuard BP X2 drone backpack! Before I discovered the Lowepro QuadGuard drone backpack I was using a toolbox nested inside the Ridgid Pro Gear Cart.  The toolbox held my quads, batteries, props and misc gear.  The Ridgid gear cart was my FPV seat.  It was a nice setup but …

 
View Post

ISDT SC-608 Mini LiPo Battery Charger

In Review by FlightClub6 Comments

LiPo Battery Charger: iSDT SC-608 I’ve been looking for a simple portable field lipo battery charger for a while and I finally found it.  The iSDT SC-608 is a micro 150w balance lipo battery charger that fits in the palm of your had. Specifications Charges LiPo, LiFe, Lilon, LiFe and LiHv (1s-6s) NiMh/Cd (1-18s) Pb (1-12s) Input Voltage DC 9-32v Output …

 
View Post

Furious True-D Diversity Goggle Receiver Review

In Review by FlightClub11 Comments

Furious True-D Goggle Diversity Receiver I’ve been using the Furious True-D diversity receiver for the past 3 months and I love it.  This is one of those products you use, love and want to tell everybody about it. What is the Furious True-D?  The Furious True-D is a plug-and-play receiver module for FatShark Goggles that offers receiver diversity.  What is a receiver diversity? …

 
View Post

How to Setup a Lumenier QAV-X

In Build, Review by FlightClub20 Comments

How to Setup a Lumenier QAV-X Time to finish up the QAV-X build!  In part 1 of the build, we did all the soldering and physical build.  Part 2 we will program the Taranis, flash and configure the KISS FC then go for some test flights. Parts used in this QAV-X Build Lumenier QAV-X 4mm KISS FC DYS XS20A EMAX …

 
View Post

Tiny Whoop Upgrade: Motors and Batteries

In Build, Review by FlightClub2 Comments

Tiny Whoop Upgrade This is a Tiny Whoop upgrade must, the motors.  I’ve been putting around in my Tiny Whoop with the standard motors and having a blast.  But I was missing out.  I recently added a Tiny Whoop upgrade that really woke up the micro quad, the Lumenier RX0615-14 Micro Brushed Motors. I’ll be comparing two Tiny Whoops in this …

 
View Post

QAV-X Build: How to Build a Lumenier QAV-X Part 1

In Build, Review by FlightClub34 Comments

How to Build a Lumenier QAV-X Time for another build!  The Lumenier QAV-X build is one of my favorite quads right now.  It’s no secret I really like the Lumenier frames.  Their designs are all really well thought out using the highest quality components.  The QAV-X is no exception.  The frame comes in 3mm and 4mm versions.  Both the frames …

 
View Post

KISS FC – Easy to Follow Setup and Review

In Build, Review by FlightClub25 Comments

KISS FC – Setup and Review I have to be honest and admit, I put off flying the KISS FC because I was intimidated.  One, I didn’t want to learn a new software because it doesn’t run off Cleanflight or even Baseflight, gasp!  Two, take a look at the KISS FC manual and it will send you running with unanswered …

 
View Post

Best Night FPV Camera: RunCam Owl Plus Review

In Review by FlightClub6 Comments

Best Night FPV Camera: RunCam Owl Plus I live in Texas and summers are brutally hot.  The only time I can really fly is early in the morning or late at night when the temperature drops below 90 degrees.  I’ve been looking for the best night FPV camera for a long time.  And I’ve found it.  I bring you the …